5
DAB Mode
How to Get Start?
1. Place the unit on a flat stable surface and extend the telescopic aerial to ensure best reception in both
DAB+ and FM modes. Connect the power adaptor to the DC Jack on the side of the unit, and press
STANDBY
to switch it on.
2. For initial use, it will automatically run a full scan and save all the detected stations into its memory,
perhaps this will need one or two minutes.
3. Once the scanning is finished, the DAB+ stations will be displayed in alphanumeric order. The first
station in the list would be selected.
4. If no station detected, press
MENU
, and then press
to
‘
Full scan
’
à
press
SELECT
to confirm.
5. Want to change to another station? While playing a DAB+ program, you can cycle through stations list
by pressing
or
, and press the
SELECT
to confirm the station preferred.
@
Note:
If no DAB+ signal found in your area, relocate your radio and perform another scan.
How to Display the Signal Strength?
1. While playing a DAB+ program, press
INFO
, the display will show a line of signal bars, which
indicates the strength of the current station.
@
Note:
Stations with signal strength below the minimum signal level will not provide a stable streaming of audio.
