3
1.2
PRECAUTIONS
WARNING
CAUTION
To reduce the risk of electric shock, do not
attempt to open the cabinet. There are no parts
inside you can service yourself. Refer all
servicing to qualified personnel.
To ensure reliable operation and to protect the
unit from overheating, the ventilation slots and
openings must not be blocked or covered.
Avoid placing the unit in enclosed spaces such
as a bookcase, unless there is adequate
ventilation.
Keep this unit away from radiators and other
heat sources.
Avoid using the unit near strong magnetic fields.
Do not push objects of any kind into this unit
through the cabinet slots as they could touch
current carrying parts or short-circuit parts,
resulting in fire, electric shock, or damage to
the unit.
Be careful not to spill liquid of any kind on this
unit. If liquid is spilled into the unit, consult a
qualified service engineer.
Use this unit in the horizontal (flat) position only.
Avoid places the unit to strong vibration.
Do not place heavy objects on the unit. This
may damage the cabinet or cause trouble within
the unit.
Unplug the unit from the AC outlet when it is
not to be used for a long period of time.
When there is lightning, unplug the unit from
the AC outlet immediately. Never touch the
antenna wire during a lightning storm.
You may experience static discharge when
touching the unit. If this happens, and the unit
fails to operate, turn off the power and
disconnect the plug from the wall outlet.
When installing the TV receiver, please make
sure that a clearance of minimum 10 cm is kept
between the top side, back of the TV and the
nearest wall or furniture enclosure in order to
allow proper ventilation for the TV set.
CLEANING THE UNIT
When the cabinet has become dirty or
stained, dip a piece of gauze or soft cloth
into a dilute solution of neutral cleanser and
wipe clean. Never use thinner or benzene
since they will damage the surface of the
cabinet.
When the television screen become dirty,
wipe it gently with a piece of soft, lint-free
cloth. Do not scratch the surface of the
screen.
,
NOTE ON CONDENSATION
Moisture condensation may occur inside
the unit when it is moved from a cold
place to a warm place or under high
humidity .
Be sure any condensation has evaporated
completely
before
power on the unit.
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
