Press
SNOOZE
. The alarm stops and will sound again 9 minutes later. The SNOOZE indicator will blink during snooze period.
2-Alarm stop
Press
or
. The alarm will sound again the next day at the same time.
3-Alarm Cancellation
In standby mode, press
to cancel the alarm permanently. The alarm indicator
lights off.
* Same procedure applies for Alarm 2 with
button.
SLEEP FUNCTION
To fall asleep with the radio, Press
then
to select 120-90-60-30-15 or 5 minutes of listening.
indicator lights up. The
unit will automatically turn off after the specified time. To cancel the sleep function, press
or press
to OFF.
CONNECTING AUXILIARY SOURCE
1. Connect your auxiliary source (e .g. mp3 player) to the
AUX IN
jack on the back of unit (cable not included).
The unit will switch
to AUX mode automatically. AUX indicator lights up.
2. Start playback from your auxiliary source.
3. Adjust the volume to desired level.
4. To stop playback, disconnect your auxiliary source from the
AUX IN
jack.
DIMMER
Press
to select the
brightness of the screen: high, low or OFF.
TECHNICAL SPECIFICATIONS
POWER SUPPLY: AC 240V ~ 50Hz, 4W consumption
DC 2x1.5V, battery type AAA/R03/UM-4 (not provided) for back-up
RADIO: FM 64-108MHz
AM 540-1600kHz
Note: Design and specification are subject to change without notice.
PHYSICAL SPECIFICATIONS
Net weight: 0.485kgs
Gross weight: 0.565kgs
Unit dimensions: 166 x 96 x 76mm
MORE INFORMATION
CAUTION:
To reduce the risk of electric shock, do not open the device, there is no party inside for the user. Refer all
servicing to qualified personnel.
The lightning with the arrow symbol in the triangle is a warning sign alerting the user to "dangerous voltage" inside the unit.
The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product.
The Caution mark is located at the bottom of the device.
IMPORTANT
- Use the device in moderate climates.
- The Marking plate is located at the bottom of the device.
- Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
- Ensure that the ventilation openings are not covered with items such as newspapers, blankets, tablecloths, curtains, etc.
- Do not place naked flame sources, such as lighted candles on the apparatus.
