Teac CD-C68E, Руководство пользователя

Страница: 14 / 24

Note : The volume control is effective either on CD-IN or AUX-IN, as selected.
It defaults to CD-IN. To switch the control to AUX-IN, use editors or the like to change the
CD-IN to Aux Mode=AUX IN in [Config] session of CDP.INI.
In passing CDP uses the volume control on sound cards.
When no sound cards are used or depending on sound cards in use, you may not be
able to control the volume. This is indicated by neither Volume, Balance,
nor CD-IN/AUX-IN buttons appearing on the screen. Use then utility that comes with
the sound card. For the details, see the sound card’s manual.
(2) Windows 95 (CDP95)
(a) Installation
Run the SETUP.EXE file contained in the TEAC CD-ROM Changer Installation Disk for Windows
95/NT. The setup screen will appear; then, follow the instructions on the screen.
(b) Functions
The TEAC CDP95 is operated by clicking buttons on the screen by mouse control.
The functions of each button are the same with that explained earlier for the CDP, in paragraph
(b) under (1) Windows (CDP).