Teac CA-20, Инструкция по эксплуатации

Страница: 10 / 17

4. Operations
4-1. Install batteries
When CA-20 is used under battery mode, install batteries to the case on bottom.
-
Unfasten screw of battery case.
-
Install four LR-6(AA) alkaline batteries to battery case.
Screw Battery pole sign
Note:
- Operating time depends battery type.
- It works about one hour using alkaline batteries.
- Use AC/DC adapter when it’s used for a long time.
- Remove batteries, if it’s not used for a while.
4-2. Attach accelerometer
- Clean the base and remove dust
- If a accelerometer has a female screw, attach accelerometer using screw which supplied with
accelerometer
- If a accelerometer has M6 male screw, it can be attached using male screw
- If a screw which accelerometer has is not M6, use conversion screw or conversion stud.
Note:
- Attach accelerometer less than 0.5 N-m ( 4.43 inch-lbf ) torque
6