![Teac AG-V8520 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/teac/ag-v8520/ag-v8520_owners-manual_4022696004.webp)
PRECAUTIONS
– 4 –
TO THE USER
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against interference in a residential area. This
device generates and uses radio frequency energy
and if not installed and used in accordance with
the instructions, it may cause interference to
radio or TV reception. If this unit does cause inter-
ference with TV or radio reception you can try to
correct the interference by one or more of the fol-
lowing measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equip-
ment and the receiver.
c) Plug the equipment into a different outlet so
that it is not on the same circuit as the receiver.
If necessary, consult the dealer or an experienced
radio/TV technician for additional suggestions.
CAUTION
Changes or modifications to this equipment not
expressly approved by TEAC CORPORATION for
compliance could void the user's authority to
operate this equipment.
For U.S.A.
The equipment draws nominal non-operating
power from the AC outlet with its POWER switch
in the STANDBY position.
Obs! nätströmställare ¨n skiljer ej hela apparaten
från nätet.
VOLTAGE CONVERSION
Be sure to remove the power cord from the AC
outlet before repositioning the voltage converter
switches.
1. Locate the voltage selector on the rear panel.
2. Using a flat-bladed screwdriver, set to the
appropriate 120 V or 230 V position according
to your area.
For General Export Models
AC POWER CORD CONNECTION
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
For CANADA
●
Choose the installation location of your unit carefully.
Avoid placing it in direct sunlight or close to a source
of heat. Also avoid locations subject to vibrations and
excessive dust, heat, cold or moisture.
●
The ventilation holes should not be covered. Make
sure there is at least 20 cm (8 inches) of space above
and at least 5 cm (2 inches) of space beside the
amplifier/receiver. Do not place a CD player or other
equipment on top of the amplifier/receiver.
●
Do not open the cabinet as this might result in
damage to the circuitry or electrical shock. If a
foreign object should get into the set, contact your
dealer.
●
When removing the power plug from the wall outlet,
always pull directly on the plug, never yank the cord.
●
Do not attempt to clean the unit with chemical
solvents as this might damage the finish. Use a
clean, dry cloth.
●
Keep this manual in a safe place for future reference.
Read This Before Operating