4 Key
2
(Vertical
geometry for
NTSC
system)
6VPOS(52)
6VAM(57)
6VSL(37)
6VL(32)
6VSC(31)
6SCL(32)
6WBR(5)
6WBF(2)
Input a NTSC
cross hatch
pattern.
Adjust 6VPOS for vertical position
Adjust 6VAM for vertical amplitude.
Adjust 6VSL for vertical slope.
Adjust 6VL for vertical linearity
(Normally use default value)
Adjust 6SCL for vertical S-correction
Adjust 6WBR for start of blanking time
on 4:3 mode (16:9tube)
Adjust 6WBF for end of blanking time on
4:3 mode(16:9tube)
5 Key
3
(Horizontal
geometry for
PAL system)
5HSH(39)
5PAR(32)
5BOW(33)
5EWW(55)
5EWP(9)
5UCR(25)
5LCR(39)
5EWT(27)
Input a PAL cross
hatch pattern with
black and white
background.
Adjust 5HSH for horizontal position.
Adjust 5PAR (parallilogram), 5BOW,
5EWP (parabola width), 5UCR (upper
corner), 5LCR (lower corner) and 5EWT
(trapezium) until the vertical line at left
and right side of the picture become
straight.
Adjust 5EWW for horizontal width.
6 Key
3
(Horizontal
geometry for
NTSC
system)
6HSH(51)
6PAR(37)
6BOW(34)
6EWW(55)
6EWP(12)
6UCR(39)
6LCR(43)
6EWT(29)
Input a NTSC
cross hatch
pattern with black
and white
background.
Adjust 6HSH for horizontal position.
Adjust 6PAR(parallilogram), 6BOW,
6EWP(parabola width), 6UCR(upper
corner), 6LCR(lower corner) and
6EWT(trapezium) until the vertical line at
left and right side of the picture become
straight.
Adjust 6EWW for horizontal width.
7 Key
4
RF AGC(28)
CPEK PAL(32)
CFPEKPAL(
3.5M
)
CFPEKNTS(
3.1M
)
CFPEKYUV(
4.0M
)
IFPL(32)
BBTC(32)
PGR/B/G(64)
VG2BRI(20)
HDOL(4)
Receive a 60dB
grey scale +
color bar signal
Press EXIT key to auto adjust RF AGC
(The others use default value)
8 Key
5
(Status
adjustment)
CNTX (63)
CNTN (0)
BRTX (16)
BRTN (12)
COLX (20)
COLN (0)
TNTX (20)
TNTN (12)
----------
Max. And Min. Value setting for
contrast, brightness, color, tint
(all use default value)
9 Key
6
(Status
adjustment)
CNTC(25)
BRTC(31)
COLC(28)
TNTC(30)
COLP(0)
COLS(28)
BRTS(0)
----------
center value of contrast(CNTC),
brightness(BRTC),color(COLC),tint(TIN
TC).
adjust BRTC for the sub-brightness
COLP means COLC for PAL,COLS
means COLC for SECAM
Do not change value BRTS
