TE CERTI-CRIMP, Инструкция, Страница: 9 / 10

408-1559
Rev U
9 of 10
TOOL
JAW CLOSURE♦ DIMENSION F GAGE ELEMENT♦♦ DIMENSION G
DIMENSION W
(WIDTH)
GO NO-GO GO NO-GO
46121
169485
0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
3.05 [.120]
47304 0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
3.05 [.120]
47386
47386-5
0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
3.05 [.120]
47387 1.016 [.0400] 1.524 [.0600]
1.016-1.024
[.0400-.0403]
1.521-1.524
[.0599-.0600]
4.75 [.187]
47907-1 0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
2.36 [.093]
48518-2 0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
3.05 [.120]
69151-1 0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
3.05 [.120]
69454 0.762 [.0300] 1.27 [.0500]
0.762-0.77
[.0300-.0303]
1.267-1.27
[.0499-.0500]
3.05 [.120]
68343-1 1.828 [.0720] 2.337 [.0920]
1.828-1.836
[.0720-.0723]
2.334-2.337
[.0919-.0920]
4.75 [.187]
♦Jaw closure dimensions apply when wire barrel jaws are bottomed, but not under pressure
.
♦♦Material: Tool Steel
Figure 8 (end)
Figure 9
W ±0.13 [±.005]
NOTE: Most insulation barrel gages are designed
to check one side of the crimp nest at a time.