MODEL 4020 & 4030 ACCELEROMETER
TE CONNECTIVITY SENSORS
/// MODEL 4020 & 4030 ACCELEROMETER 05/2016
Page 3
2x ¼ or M6 mounting screws
Torque to 18 lb-in (2.0 Nm)
DESCRIPTION
The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing with an integral cable
assembly. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth and an operating temperature range of -
40°C to +85°C. The model 4020 is a dual axis configuration while model 4030 is a triaxial configuration.
INSTALLATION
The model 4020 & 4030 accelerometers are designed to be screw mounted. The following guidelines should be followed when screw
mounting these accelerometers.
The mounting surface should be clean and free of any residue or foreign material.
The mounting surface should be smooth and flat.
Torque screws to recommended limits using steel washers under the heads of the mounting screws. Use manual torque wrench (do not
use electric tools).
