409-10060
Rev D
4
of 11
Figure 1
1.
INTRODUCTION
The Battery Powered Hydraulic Pump Kit PN 1804111-[ ] (shown in Figure 1) comes with a portable battery-
powered pump (a 10,000 psi hydraulic pump and controller used to power hydraulic crimping heads), two
lithium battery cartridges, battery charger, 3/8-in. male screw type coupler, and a metal storage box (the metal
storage box is not shown in Figure 1).
Pump Kit PN 1804111-1 has a 110 Volt, 60 Hz battery charger; Pump Kit PN1804111-3 has a 220 Volt, 50 Hz
battery charger.
When reading this manual, pay particular attention to DANGER, CAUTION, NOTE statements.
DANGER
Denotes an imminent hazard which may result in moderate or severe injury.
CAUTION
Denotes a condition which may result in product or equipment damage.
NOTE
Highlights special or important information.
Reasons for reissue of this customer manual are provided in Section 8, REVISION SUMMARY.
NOTE
Dimensions in this manual are in metric units [with U.S. customary units in brackets].
Rechargeable
Pump
Remote
Control
Switch
Battery
Charger
Battery Cartridge
Coupler
PN 311470-1