SDE Crimping Die Set 1.5, 2.5 diameter Contacts
Page 6 - 8
Operating instructions
411-18592-1 Rev.A
Abb. 3 :
Terminal placed in the lower crimping die (left)
Placing the sealing ring and wire together (wire)
Join together the wire and the sealing ring according to processing specification 114-18018.
Insert the wire into the terminal until it reaches the wire stop.
Abb. 4 :
Inserting wire including sealing ring up to the wire stop point (left), wire stop point (right)
Close the tool handles until the ratchet mechanism releases and the handles open.
To the wire stop
