SDE Crimping Die Set 1.5, 2.5 diameter Contacts
Page 3 - 8
Operating instructions
411-18592-1 Rev.A
1
Revision history
Rev.
Date
Description
Name
A
12.08.2015
First version
Levin Sandhu
Tab. 1 :
Revision process
2
Introduction
2.1
About these operating instructions
These operating instructions describe the use and operation of the SDE crimping die with the
hand crimping tool and the necessary maintenance measures. All persons using the machine
must therefore be familiar with and follow these operating instructions. It should be stressed that
the operating instructions for the SDE crimping die set are essential.
These operating instructions must be available with the crimping die set at all times. The tool
owner and/or user is obliged to supplement these operating instructions with instructions in line
with existing national regulations for the prevention of accidents and environmental protection.
These operating instructions apply to the following crimping machine from TE Connectivity:
SDE Crimping Die Set 1.5, 2.5 diameter Contacts: TE PN 3-1579017-3
The following operating instructions must also be observed:
HT33-SDE Basic Hand Tool, Operating Instructions: TE PN 1-744017-0 / 411-18581
2.2
Intended use
The SDE crimping die set serves to crimp pin and socket contacts according to TE processing
specifications and diagrams. The SDE crimping die set may only be used for repair purposes or
for making samples, not for series production. The following terminals can be processed with
the crimping die set:
Terminal PN
Cross-sec-
tion
Terminal
TE processing specification
962972, 962982,
962993, 962999
1.5 mm²
2.5 System SWS
Appl. Spec. 114-18020
Appl. Spec. 114-18040
TE PN 3-1579017-3
962972, 962982,
962993, 962999
2.5 mm²
2.5 System SWS
Appl. Spec. 114-18020
Appl. Spec. 114-18040
TE PN 3-1579017-3
Tab. 2 :
Processable terminals
