408-35208
Rev
B
7
of 7
4.2.
Air supply
The air supply is 80 to 120 PSI (5.5 to 8.3 BAR) and needs filter, dryer, and regulator. Lubricator is
recommended. Check hoses and fittings for integrity and fix leaks as required.
The inlet port has a ¼” NPT fitting. Apply thread sealing tape or compound to avoid leakage or damage. Adjust
1/16” hex set screw OUT
for a hand valve or IN for a foot switch.
Figure 8: Air fittings
5.
REPLACEMENT AND REPAIR
If parts are damaged or worn excessively, they must be replaced. Order replacement parts through your TE
representative. You can also order parts by any of the following methods:
Go to
Shop TE
link at the top of the page.
Call 800-522-6752.
Write to:
CUSTOMER SERVICE (038-035)
TE CONNECTIVITY CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
For customer repair services, call 800-522-6752.
6.
REVISION SUMMARY
Revisions to this instruction sheet include:
Replaced Figure 1 with a more accurate drawing.
