114-1016
7
of 8
Rev
EE
5. TOOLING
Tooling part numbers and instructional material packaged with the tooling are shown in Figure 9.
Each applicators is designed to crimp contacts onto pre-stripped wire and provide for high volume, heavy duty
production requirements. These applicators accept interchangeable crimping dies and must be installed onto a
power unit. The crimp quality monitor applicator is designed to be connected to the crimp quality monitor used
with the power unit.
AMP-O-LECTRIC Model “K” Terminator Machine
565435-5 (409-5128) (Obsolete)
AMPOMATOR CLS IV Lead-Making
Machines 217500-[ ] (409-5866)
Heavy-Duty Quick-Change Applicators
(Side-Feed Type with Mechanical Feed
System) (See Table) (408-8040)
Crimp Quality Monitor (CQM) Applicators for Side-Feed
and End-Feed Applications (See Table) (408-9640)
AMP-O-LECTRIC Model “G” Terminating
Machines 354500-[ ] (409-5842)
Miniature
AMP-IN
26-22
1.02-1.78 [.040-.070]
466739-1
466739-4
466739-3
466991-1
1.02-2.54 [.040-.100]
466676-3
—
466676-4
—
1.52-2.54 [.060-.100]
466062-1
—
466062-6
22-18
1.52-2.79 [.060-.110]
567336-1
—
567336-2
567840-1
1.52-2.79 [.060-.110]
687911-1
687911-8
687911-7
567924-1
1.52-2.79 [.060-.110]
466648-3
—
466648-4
—
18-14
2.29-3.81 [.090-.150]
567183-8
—
567183-7
567923-1
12
2.29-3.81 [.090-.150]
567183-8
—
567183-7
567923-1
12-10
5.08 [.200] Max
680078-1
680078-3
680078-2
—
680078-4
Miniature
AMP-IN 2000
26-22
1.27-2.79 [.050-.110]
680423-1
680423-3
680423-2
—
22-18
680422-1
680422-3
680422-2
Figure 9
CONTACT
TYPE
WIRE
APPLICATOR FOR POWER UNIT
CQM
APPLICATOR
SIZE
(AWG)
INSULATION
DIAMETER
AMPOMATOR CLS IV
Lead-Making
Machine
AMP-O-LECTRIC
Model "G"
Terminating Machine
AMP-O-LECTRIC
Model "K"
Terminating Machine
