©2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
Operating Instructions
2-744017-4
Rev A2
*Trademark. Other products, logos, and company names used are the property of their respective owners.
Fig. 8: Removing the terminal from the crimping die
Figure 9: Checking the crimped terminal
Then you can remove the crimped terminal from the crimping die. To remove the crimped terminal,
press down on the terminal positioner again to release the terminal. If the terminal is stuck, wiggle it
slightly to remove it.
Check the crimp height of the crimped terminal. Based on the information in the TE Connectivity
processing specification and the drawing (see Section 5).
13/14
