114- 40020
Rev D
4
of 9
3.5. Header Spacing
Care must be used to avoid interference between adjacent header assemblies and/or other components. The
information provided in Figure 4 is to ensure proper clearance for the headers.
Figure 4
6.99 [.275] Minimum
Centerline Distance
3.6. Installing Headers
The headers must be installed using the seating tools provided in Section 5, TOOLING. Refer to Figure 5 for
seating information.
When seating the headers onto the pc board, make sure the ejector latches are not installed on the headers. If the
headers already have pre--installed ejector latches on them, they must be removed prior to seating the headers on the
pc board. Refer to Paragraph 3.10 and Figure 8 for installation of ejector latches.
Figure 5
PC Board
Customer Supplied
PC Board Support
Fixture
Seating Tool
Header Assembly
No Ejector Latches
On Header During
Insertion Into PC
Board
Machine Ram
Machine Base
CAUTION
!
