background image

24-Port GIGABIT MANAGED PoE 

SWITCH QUICK INSTALLATION GUIDE

INSTALLATION

Rack mounting

Step 1

: Install left and right front mounting brackets to the switch using 4 M3 screws 

on each sideprovided with switch.

Step 2

: With front brackets orientated in front of the rack, nest front and rear bra-

ckets together. Fasten together using remaining M4 screws into counter sunk holes.

Step 3

: Fasten the front mounting bracket to the front of the rack.

PANEL LAYOUTS

WIRING

For pin assignments please refer to the instructions below: 

Grounding

 

Grounding and wire routing help limit the effects of noise due to electromagnetic in-

terference (EMI). Run the ground connection from the grounding pin on the power 

connector to the grounding surface prior to connecting devices. 

Power port pinouts

 

The 2352906 series uses the M12 S-coded 4-pin female connector on the front panel 

for the power input.

Step 1

: Insert a power cable to the power connector on 

the device.

Step 2

: Rotate the outer ring of the cable connector until 

a snug fit is achieved. Make sure the connection is tight.

Console port pinout
 

Relay

NC

NC

NC

M12 X-Code Ethernet ports

Relay output ports pinouts 

The switch uses the M12 A-coded 5-pin female 

connector on the front panel for relay output. Use 

a cable with an M12 A-coded 5-pin male connector 

to connect the relay. The relay contacts will detect 

user-configured events and form an open circuit 

when an event is triggered.

The switch has one RS-232 (M12 A-Code 5pin) 

console port, located on the front panel. Use a 

M12-to-DB9 console cable to connect the conso-

le port to your PC‘s COM port.

Pin 

No.

Description

Pin 
No.

Description

1

BI_DA+/Vout+

5

BI_DD+

2

BI_DA-/Vout+

6

BI_DD-

3

BI_DB+/Vout-

7

BI_DC-

4

BI_DB-/Vout-

8

BI_DC+

1

1

Reset Button

2

Power status LED

3

R.M. Status LED

4 Ring Status LED

5

Fault LED

6

Power Connector

7

Relay output port

8

Console port

8

2

3

5

4

9

PoE enabled Gigabit ethernet ports

10 Link/ACT LED for PoE enabled Gigabit ports

11

PoE indicator for PoE enabled Gigabit ports

12 Speed LED for PoE enabled Gigabit ports
13 1G/2.5G/5G/10GBase-T Ethernet ports with bypass

14 Link/ACT LED for non-PoE Gigabit ports
15 LED for 5G/2.5Gbps Ethernet speed indicator

16 LED for 10G/1Gbps Ethernet speed indicator

9

12

10

6

13

11

16

14 15

7

Отзывы: