RBK-X1
PN 2234800-1
Page 20 Rev A Sept 2019
3.5 Maintenance
1.
Standby Time, the processor will automatically entry standby mode if no action.
Default value: 60 mins, turn OFF
this function by input value “0”.
2.
Processor Calibration Counter, by cycle (pc) or by Hour.
Default value: 75000 pcs / 350 Hours
3.
4.
Processor cycle counter, which is designed to indicate the processor operation cycle after
leave factory. Can be reset by engineer.
5.
Heating element timer, which is designed to indicate the hours the heating element
operate. It is required to reset when replaced the heating element.
6.
Key lock.
OFF, operator can operate on the 10X quick button.
ON,
processor won’t response when operator press on the 10X quick button.
7.
Change password. Higher level authority can change lower level authority log on password
.
When click on icon
, it will pop up the window
left. You can change the password in this window.
(This window shown, is log on as MFG.)