408- 10086
3
of 4
Rev
C
5. Clean the stripped fiber with a solution
of greater than 91% ISO alcohol. (99%
alcohol solution is recommended.)
2. Open the fiber clamp.
3. Press down on the button and slide the
carriage back (in the direction shown).
4. Move the fiber slide back until it stops.
9. Slide the carriage forward (in the
direction shown).
6. Place the stripped and cleaned fiber
into the slot at the desired cleave length.
7.
While maintaining firm pressure on the buffer
,
move the fiber slide forward until it stops.
8. Close the fiber clamp.
