TDW POLYSTOPP, Инструкция по эксплуатации и обслуживанию

Страница: 21 / 52

TDW France-22-E-03-09
Figure 29. Plugging Head Halves
C. Insert the upper plugging head half, then reposition the control bar handles to the folded position and
insert the lower half onto the control bar, as shown in Figure 30.
Figure 30. Install Plugging Head and Secure
D. Secure with button head screw and the brass washer at the bottom of the bar, as shown in Figure 31.
Figure 31. Secure Plugging Head
E. Lubricate inside of sealing element halves lightly. Note the curved or notched area on one end, as
shown in Figure 32. This goes to the top and curves around the control bar.