TDT RV2, Руководство пользователя

Страница: 7 / 18

System 3 8-9
RV2 Video Processor
Using Windows XP
To access the RV2 file system through a PC:
1. You will have to configure the PC TCP/IP settings. Open Control Panel
then double-click Network Connections .
2. Right-click the desired connection (this is usually a Local Area Connection)
and select Properties .
3. Select Internet Protocol (TCP/IP) or if there are multiples, select Internet
Protocol (TCP/IPv4).
4. Click the Properties button.
5. Select Use the following IP address and enter these values:
IP address: 10.1.0.x, where x can be any value from 1 to 254 except 42.
Subnet mask: 255.255.255.0
Default gateway: Leave empty
6. Click OK . The RV2 can now be accessed by the PC.
7. Obtain the RV2 device address.
a. Press the Live tab on the RV2 interface.
b. The device address is displayed at the top of the page to the right of
Device Name field.
8. Enter the device address as shown in a windows address bar to access the
RV2 file system.
Typically, the path \\RV2-XXXX\ is used to access the RV2 storage array,
where XXXX is the device serial number, but the name should be verified on
the Live tab.
9. Access the files on the RV2 by reading or writing.