8-12
System 3
RV2 Video Processor
Live
The Live tab shows the current image captured by the camera, allows changes to
the camera settings, and allows the user to choose the current tracking configuration.
Device Name:
The NetBIOS name of the device.
Firmware Version:
The currently installed firmware version number. This is
useful for identifying the current firmware version and
also to verify that a recent firmware update has been
installed. See “Config” on page 8-15, for more
information on updating the firmware.
Current Config:
A dropdown list of all available configurations. Tap a
configuration to select it.
AutoOnce:
Tells the camera to perform its built-in auto-adjustment
of exposure, gain and white balance.
Lighter/Darker:
Adjusts the exposure time longer and shorter,
respectively.
Full Screen:
Displays the camera image over the entire screen.
Tapping on the full screen image returns the interface to
normal.
Resolution:
(v1.6b & above) A dropdown list at the bottom of the
screen controls the camera resolution (640x480 or
320x240). Lower the resolution to achieve a higher
frame count.
Manual Control:
Enables the Snapshot, Track LEDs and Record buttons.
You cannot record from OpenEx while the RV2 is in
Manual mode. When in Manual Control mode, tap the
Manual Control button to disable Manual Control.
Snapshot:
Copies the current camera image to a JPG file on the
RV2 hard drive, into the snapshots folder.
Track LEDs:
Applies the tracking specification in the currently selected
configuration file to the live camera feed. If colored
targets are tracked, dots will appear in the image where
the algorithm is finding targets. Use this mode to
Содержание RV2
Страница 18: ...8 20 System 3 RV2 Video Processor...
