08
Binding drone to the controller
1. Fully insert battery into drone unit and place on level surface
2. When 4 LEDs flash rapidly, the drone is ready to bind
3. Turn on the controller by switch the power switch to “ON”
4. Push the left stick up then down
6. LEDs on the drone will stop flashing after binding has been successful
After blinding, you can push the Throttle Stick up slightly to start the motors for takeoff.
To land, push the Throttle Stick down slowly until the drone lands and motors stop.
Takeoff
Land
Fully insert battery
Turn on the controller
Power On
Push the left stick
up, then down
Start the motors