piezobrush PZ2
Z63000Z2910Z1Z62
Operating Instructions for Handheld Device
PZ2 - Prototypes
Preliminary data
2019-06-12
Please read Cautions and warnings and
Page 13 of 17
Important notes at the end of this document
.
9 Decommissioning
Press the On/Off button again.
Disconnect the power supply once work is complete.
10 Maintenance
10.1 Cleaning
Only clean the outside of the plasma generator.
Ensure that the plasma generator is disconnected from the power supply.
Only clean the plasma generator with a cloth dampened in water. Do not use solvents to clean the plasma
generator!
Attention – Damage to device!
Never touch the piezo component on the front side of the device with sharp-edged
objects. This component may be damaged by improper handling.
Note!
The plasma generator with standard nozzle is not fit for the use on metal or electrically conductive
substrate
Such substrate may result in negative affect on the process and damage to the device.
The treating of electrically conductive substrate is only allowed with a specially designed
nozzle (e.g. the nearfield nozzle).
Do not use the plasma generator on sensitive electrical components for it may damage these
components.
X
X