TDK-Lambda Z+ Series, Руководство пользователя

Страница: 9 / 18

8
4.3 SCPI Subsystem Commands
Subsystem commands control all Z
+
functions. For a full command description refer to section
7.12 in Z
+
series User Manual. Short list of Z
+
series commands:
SCPI Command Description
ABORt Aborts the triggered action
DISPlay
[:WINDow]:STATe <bool> Display ON/OFF*
[:WINDow]:FLASh <bool> Display Flash
GLOBal
:CURRent
:[AMPLitude] <NRf+> Set the output current for all power supplies
:VOLTage
:[AMPLitude] <NRf+> Set the output voltage for all power supplies
:OUTPut:STATe <bool> Enables/disables the all power supplies output
*RCL {1|2|3|4} Recall setting for all power supplies
*RST Reset all power supplies
*SAV {1|2|3|4} Save settings for all power supplies
INITiate
[:IMMediate] Trigger initiate
:CONTinuous <bool> Enable/disable continuously trigger*
INSTrument
:COUPle ALL|NONE Couple for all Z + power supplies
:NSELect <NRf> Select the power supply for communication*
MEASure
:CURRent[:DC]? Returns the measured output current
:VOLTage[:DC]? Returns the measured output voltage
:POWer[:DC]? Returns the measured output power
OUTPut
[:STATe] <bool> Enables/disable the supply output*
:PON
[:STATe] <bool> Programs the Power-ON state*
:PROTection
:CLEar Resets latched protection
:FOLDback
[:MODE] OFF|CC|CV Set operation protection mode*
:DELay <NRf+> Set protection delay*
:ILC
:MODE <bool> Enables/disable analog output ON/OFF control*
:TTLTrg
:MODE OFF|FSTR|TRIG Set output trigger mode*
:RELay {1|2}
[:STATe] <bool> Set control pins status*
:MODE? Returns the operation mode CV/CC/OFF