TDK-Lambda Genesys Series Скачать руководство пользователя страница 6

Страница: 6 / 64

1.2. FEATURE SUMMARY

•

Communicate

over any standard TCP/IP network

LAN (Local Area Network)

WAN (Wide Area Network)

Communicate across the world using the Internet

•

Web page

viewable with any web page browser, such as Internet Explorer

Optional password protection prevents unauthorized operation

Program the output settings and protections

Measure the power supply output, view the power supply status

Configure the network connection settings

•

LXI Class C

Conforms to LXI standards (revision 1.1) for network configuration

A “LAN Status” indicator shows when the network connection is established

“VXI-11 Discovery” protocol is implemented to search for connected devices

IVI-COM drivers are available for download

Easily write custom automation programs

•

Full remote programming functions

Control and read-back of all settings

Full status and error reporting

Uses SCPI command language, an instrumentation standard

Compatible with VISA instrument drivers

(VISA drivers are available for almost any programming language)

Supports network “socket” programming

Same functional features as the IEEE option card.

•

Front Panel features

View IP and MAC address on front panel

LAN Reset on front panel

User may remotely “Blink” the front panel to locate a power supply in a rack

•

Rear Panel features

RJ-45 connector (standard 8-pin phone jack for LAN)

Link and Activity LED on RJ-45 connector

LAN Status LED shows LAN fault and is a 2

“Blink Identify” on rear panel

A LAN/Serial (RS-232/485) select switch

•

RS-485 Multi-drop Chain

Allows connecting up to 30 power supplies

One LAN IP address shared by all RS-485 power supplies

The LAN option is not needed in the RS-485 power supplies, but they must

be Multi-drop enabled

Trademark Notices

LXI is a trademark of the LXI Consortium Inc.

Microsoft and Windows are trademarks of Microsoft Corporation

Содержание Genesys Series

































































Результаты поиска

Содержание Genesys Series

Отзывы:

TDK-Lambda Genesys Series, Техническое руководство, Страница: 6 / 64

Результаты поиска

Содержание Genesys Series

Отзывы: