TDK-Lambda Genesys Series Скачать руководство пользователя страница 38

Страница: 38 / 64

the power supply outputs and statuses. However, as soon as one LAN command is used to

change the supply output, the supply will automatically go into remote mode

See section 3.1.1 for further discussion of the local and remote modes

Syntax:

SYSTem:SET <0|1|2|LOC|REM|LLO>

Parameter:

Mode

Numeric

Setting

Text

Setting

Mode

Description

Local

LOC

Operate supply from front panel.
Measurements may be made remotely

Remote

REM

Operate supply from LAN port.
Measurements may be made on front panel

Local

Lockout

LLO

Same as Remote, but front-panel
“Go to Local” button is disabled

Example:

SYST:SET 2

(or

SYST:SET LLO

)

Query:

SYST:SET?

will return

LLO

in example

7.4.3. Set Auto-Restart or Safe-Start Modes

This command sets the way the power supply will power-up when the AC is switched on. It

also affects how the supply recovers when latching faults are cleared

Latching faults

include: AC fault, over-temperature, J1-Enable and J1-Shut Off. The auto-

restart mode changes the response of the power supply when, for example, the AC power

recovers from a momentary drop-out or the J1-Enable signal is restored to normal

The start mode may be viewed on the supply front panel by pressing and holding the OUT

button (while in local mode). When the AC is first switched on, the power supply output may

be forced off, even with the auto-start enabled, by pressing and holding the OUT button

during the power-up sequence

This command is in addition to SCPI requirements

Syntax:

OUTPut:PON <0|1|OFF|ON>

Parameter:

Mode

Numeric

Setting

Text

Setting

Mode

Description

Safe-

Start

OFF

Supply will power-up with the output

off

but it

keeps all other last power-down settings.
If a latching fault clears, output will stay off but
it keeps all other settings made before the
fault occurred

Auto-

Restart

Supply will power-up with the output

at the

last power-down settings.
If a latching fault clears, output will
automatically turn back on to the last
settings before the fault occurred

Example:

OUTP:PON 1

(or

OUTP:PON ON

)

Query:

OUTP:PON?

will return

in the example

Содержание Genesys Series

































































Результаты поиска

Содержание Genesys Series

Отзывы:

TDK-Lambda Genesys Series, Техническое руководство, Страница: 38 / 64

Результаты поиска

Содержание Genesys Series

Отзывы: