TDK-Lambda Genesys GEN8-300, Руководство пользователя

Страница: 73 / 82

64
8.3 ISOLATED PROGRAMMING & MONITORING CONNECTOR
Refer to Table 8-1 for detailed description of the rear panel Isolated Programming & Monitoring
connector. To provide the lowest noise performance, it is recommended to use shielded-twisted
pair wiring.
Refer to Fig.8-1 for description of the connector.
1 2 3
4
5 6 7 8
Shield
+VPROG_ISO
+IPROG_ISO
GND
Shield
+IMON_ISO
+VMON_ISO
GND
+VPROG_ISO
Terminal Signal name Function
Shield, connected internally to
chassis of the supply.
0-5/0-10V
0-5/0-10V
0-5/0-10V
0-5/0-10V
4-20mA
4-20mA
4-20mA
4-20mA
Range 0-5/0-10V
IS510 option
Range 4-20mA
IS420 option
Chassis ground
Chassis ground
SHLD 1
Output voltage programming input
Output current programming input
2
+IPROG_ISO 3
Ground for programming
signals.
Ground for programming
signals.
Output voltage monitoring output
Output current monitoring output
Shield, connected internally to
chassis of the supply.
GND
GND
+VMON_ISO
+IMON_ISO
SHLD
4
5
6
7
8
Ground Ground
Ground
Ground
Table 8-1: Detailed description of Isolated programming & Monitoring connector
Fig.8-1: Isolated Programming & Monitoring connector
Isolated programming plug P/N: MC1.5/8-ST-3.81, Phoenix.
CAUTION
VORSICHT
Wenn die optionale Ansteuerung mit isolierten
Analogsignalen verwendet wird, legen Sie keinerlei
Signale an die nicht isolierten Pins VPGM oder lPGM
(J1-9 und J1-10) der Standardschnittstelle J1. Alle
übrigen J1-Funktionen können normal verwendet
werden.
Siehe Abschnitt 4.5 für eine Beschreibung der J1-
Funktionen.
Parallel Operation: Optional Isolated Analog
IS510 / IS420 must be installed in both the Master
and Slave unit.
When the Isolated Analog Option is installed, do not
apply any signals to the non-isolated VPGM and IPGM
(J1-9 and J1-10) pins. All other J1 features may be used
normally. Refer to Section 4.5 for a description of J1
features.
64