- 8 -
TDK-Lambda
ELC12 Series
INSTRUCTION MANUAL
9. Wiring Method
·
The output wire and input wire should be separated.
·
The output wire and input wire should not be pulled in such a manner that it will render mechanical stress to the
unit.
·
If the input and output lines are long and thin, it may affect the operation of the power supply. Check thoroughly that
there is no influence before using.
10. Light modulation control
·
Never adjust light modulation control by the PWM switch (etc.) that is connected to the output side of ELC series.
This might cause damage to the LED.
11. Switch (Relay)
·
Never use switch (relay) at the output side.
This might cause damage to the LED.
12. LED load connection
·
Never make LED wiring connections while the AC power is connected.
This might cause damage to the LED.
AC
ELC12
Series
L
N
V-
V+
PWM
LED1
LED2
LED(n)
AC
ELC12
Series
L
N
V-
V+
LED1
LED2
LED(n)
AC
ELC12
Series
L
N
V-
V+
LED1
LED2
LED(n)
