TDI International, Inc.
The Technical Source!
Page 15
SERIAL NUMBER
Select S/N to display the device serial
number and the fi rmware version.
Measurement modes and settings.
MODE MENU
The Mode menu is used to set the
measurement mode. Select RES, IND,
CAP, IMP or ESR menu items to mea-
sure desirable component or parameter
as Resistance, Inductance, Capaci-
tance, Impedance and ESR according-
ly. For automatic measurement select
AUTO (default).
AUTO MODE:
Select AUTO mode (AM
sign appears at the left bottom corner of
display) for automatic measurement of
inductance, capacitance or resistance.
MEASUREMENT MENU
Note:
In the AUTO mode ST uses 1k Hz test frequency by default and has a limited
sensitivity. Automatic detection may not work for small value capacitors and inductors.
In this case 10kHz test frequency must be used.
