3. Description
The measurement modes volt AC/DC, ampere AC/DC, frequency and 5 A current
transformer are supported. Scale endpoint of the indicator as well as scaling of the
analogue signal and current transformer measurement can be adjusted freely via
the DIP switch, alternatively there is an option for automatic adaption of the scale
endpoint. The unit can be switched between volt and ampere measurement via an
external switch. Minimum and maximum values are recorded and can be displayed
optionally using an external switch. Measured values are recorded over a time
span of 3 minutes up to 14 days. The time base as well as the display of the
measuring history can be activated by an external switch. The measured values
remain stored as long as the device is supplied with voltage.
The following parameters can be adjusted using the USB software: scale endpoint,
scale caption, display style (pointer, tachometer, bar graph, and more), splash
image, thresholds for alarm output, hysteresis, and more. Recorded measurement
values can be read and a continuous transmission of the actual measuring value
can be enabled. Using the software, values can be viewed and exported as CSV.
Front
1
Unit or free text
2
Threshold values
3
Upper scale caption
4
Graphical measurement display
5
Digital measurement value
6
Lower scale caption
Back
1
2 optocoupler switch outputs
2
DIP switch for setting measurement
mode and upper scale caption
3
Supply voltage input
4
Jumpers for configuration or
connection external switch for
activating/switching measurement
mode, graphical historic data display,
min/max display, auto-scaling
5
USB interface for alternative power
supply and software communication
interface
6
Measurement inputs
-----
2
-----
