TdA PE200B, Инструкция по установке и эксплуатации, Страница: 3 / 24

High Speed Door Servo Control System
3
Introduction
Thank you for choosing High Speed Door Servo Control System.
Please read this manual carefully before you start to use the system. In
this manual you will find instructions for how to set the operating code
the control unit, malfunction diagnostics and debugging, and routine
maintenance.
Notice:

Before connecting the system to live wire place make sure the power supply
is off.

Please make sure the power voltage in the main circuit is the some as
controller’s rated voltage. Also please make sure the ground terminal is
properly and reliably connect to the ground wire.

DO NOT touch output terminal directly. DO NOT shot circuit the output
terminal and out shell.

After the power supply is cut, and before the LCD is off, there still
high voltage electricity in the circuit, so DO NOT touch the internal wiring
and electronic components.

Internal wiring and electronic components are very sensitivity to static
electricity, so DO NOT let any object contact the internal wiring and
electronic components of motor driver and the main circuit of the touch
control panel.