TdA PE200B, Инструкция по установке и эксплуатации, Страница: 24 / 24

High Speed Door Servo Control System
24
1.5KW&2.2KW
Port Table
Port Function Remark
1 PE
AC220V input 2 N
3 L
4 Braking resistor output -
5 Braking resistor
6 Motor brake -
DC 24V
7 Motor brake +
8 Reserved
9 Safety input 1 NO (Safety edge, photocell, etc.), stop
10 Safety input 2
NO (Safety edge, photocell, etc.), reverse to open limit
when closing
11 Com/Gnd
12 DC24V+
13 Automatic open input NO (contact radar, and the sense)
14 Partial open input NO
15 Start input NO
16 Com/Gnd
17 Open limit switch input NO
18 Close limit switch input NO
19 Lock input NO
20 Com/Gnd
21 DC24V+
22 Output 1A 1A-1B normally open, set the function selection
“Output 1 Config” 1A-1B is closed
23 Output 1B
24 Output 2A 2A-2B normally open, setting “Output 2 Config”
Function selection 2A-2B is closed
25 Output 2B
26 Output 3A
3A-3B normally open, set the function selection
“Output 3 Config” 3A-3B is closed
27 Output 3B
28 Output 4A 4A-4B normally open, setting “Output 4 Config”
Function selection 4A-4B is closed
29 Output 4B
30 RS485+
31 RS485-
32 Com/Gnd
33 Manual open input NO
34 Manual close input NO
35 Manual stop input NO
36 Emergency stop input NC