48
5.
AV mini
: This is an input port to tv, to connect any device using the normal
composite video signal, and the analogic stereo left & right channels. The colour
of connectors are as follows:
Yellow Video
White Audio Left channel
Red Audio Right channel
In the event your device only has SCART EUROCONNECTOR output port, you
can find a wide range of adaptors in the market to convert your SCART to male
RCA connector, then connect this cables to the female adaptor in the tv.
6.
HDMI
: HDMI 1, 2 and 3. The HDMI ports are to connect a wide range of
devices, and enjoy the maximum performance and resolution. All of them are
CEC, and HDMI 2 is also ARC. The version used is 1.4 a.
7.
ANTENA
: Antenna connection.you can tune both DVB-T,DVB-T2 and DVB-
C.Take into account this is not a 4K tv,so no 4K channel Will be shown, even if
IRXQGDQGVWRUHGLQFKDQQHOOLVW7KLVLVQRWDIDLOXUHȍ
8.
USB
: USB 2.0 port, can be used to record and playback DTV programs,
recorded with this tv. This port can also be used to playback your own films,
see photographs or listen to your music. Some files will not be readable due
to licensee restriction.
Do not use the usb port of the tv to charge your mobile phone. It may result in
damage for your tv. The maximum size storage that can be read by the tv is 1
Terabyte. FAT32 and NTFS.
9.
CI+
: This a multimedia common interface, that can be used to obtain access
to some pay per view programms/ channels. The user must put attention to the
insertion position, or any pin may result bended or damaged, with the result of not
reading the CAM. This fault is not covered by the guaranty.
10.
Auriculares
: The headphones set must be connected here. The speakers
of the tv will not sound.
11.
S.SONIDO DIGITAL
: Coaxial digital output port. This port must be used to
connect the tv to external amplifier. The sound from all the sources of the tv will
pass through this port. The sound level of this port will not be affected by volume
key of the tv remote control. You will enjoy full digital sound in your multi speakers
audio system. Your amplifier must have the DIGITAL IN coaxial port.
