Hold fuel hose up to the hose
barb on fuel pump to determine
necessary length.
Cut fuel hose to length.
Connect fuel line and tighten
hose clamp.
Secure battery box to van floor
near the console with a few self-
tapping screws.
NOTE: Battery NOT included.
Recommend Group 24 Marine-
Grade with at 550 CCA (Cold
Cranking Amps).
Connect the RED (positive) wire
to the RED post (using one
washer and one locknut).
NOTE: ALWAYS connect the
positive (RED) side first to
avoid damage to electrical
components.
Connect the BLACK (negative)
wire to the BLACK post. After
both connections are secure,
place box cover over battery and
wires; secure with the included
strap.
Measure the distance between the
2 vacuum adapters and cut a
piece of 2-1/2” black waste hose
to this length.
Using a large pair of slip-joint
pliers, turn the vacuum adapter
to the side as shown. Slide two
2-1/2” hose clamps over the
waste hose and insert one end
onto the waste tank vacuum
adapter.
Holding the waste hose in
position, turn the vacuum adapter
so that it slides into waste hose.
13
