13
2800 Laura Lane • Middleton, WI 53562
|
800.288.9383
|
www.tcsbasys.com
Building Automation Systems
13
Installation
Startup
1.
Verify all RS485 connections from the controller network to the QWL2040 Panel are complete.
NOTE:
Refer to
Power and Communication Connections on page
for steps 2 through 5 below.
2.
Verify that all 24V power wiring to the controller network has been completed; all controllers are powered on and
each controller has been programmed with a unique RS485 address.
3.
Connect one end of the Ethernet cable to the Ethernet port 1 (C) on the Panel, and the other end to the network port
provided by the customer, or to a cell modem (if utilized).
4.
Connect the power source to the QWL2040 Panel and apply power. If your Panel was preconfigured by the TCS
factory or another user, it will automatically go online and contact Ubiquity Cloud.
5.
You MUST call TCS Technical Support (800.288.9383 ext. 2) to verify connection and activate the unit.
6.
If your Panel was not ordered preconfigured: You can configure it at this time. See
7.
Using a computer connected to the Internet, open any web browser and go to the Ubiquity Cloud web site
). Enter the login credentials provided to you at the time of sale. You will immediately
be prompted to change your login credentials. Once you have changed your login credentials, you will be able to
configure your QWL2040 Panel Building Manager.
Ubiquity login screen