16
*
cannot be shown as text in the display
Programming the function key with the Service Device
The indoor station is acting as a simplex communication device. The
commands “9“ have to be used for configuring comfort simplex communi-
cation devices (see
product information Service Device
). A programming
with the commands “9“ has to be initiated with the command *95#Ser.-
No.# one-time only. Then the programming of the function key is to be
realised with the Service Device.
initiation
call diversion
door release automatic
internal call
control function 8
reset light switch function
parallel allocation
Note:
Deactivation of the parallel alloca-
tion corresponds to the parallel alloca-
tion to serial number 0.
Ser.-No. = serial number of the indoor station which is to be configured new
DestSNo. = serial number of the destinated indoor station, to which the call is to be redirected
IntSNo. = serial number of the destinated indoor station, which is to be called intern
ParSNo. = serial number of the indoor station, to which the indoor station that is configured
new is to be allocated
General information to the OSD menu
The navigation in the OSD menu, in the image buffer indication and Live
image is realised with the navigation buttons UP and DOWN.
The OSD menu
main menu
can be switched on, if no Live image is shown
and if the indoor station is in stand-by mode, that means that no voice
connection is established and no door call has come in.
Symbols in the OSD menu are only shown if the respective function was
configured. In delivery state, not all possible functions are configured.
