6
11/2012
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49(0) 41 94/ 9 88 129
PI_ISH3022-uk
Installation
Install the lower cover
To place the connection lines without any
problems, a flush-mounted socket must be
installed behind the device.
Position the flush-mounted socket below the
cable conduit.
Install the lower cover on three attachment
holes with suitable screws to the wall.
Connect the lines
Minimise the length of the lines above the
upper cover to place the lines without any
problems and do not clamp the lines when
snapping-on the upper cover.
Connect the lines according to the labeling:
a b E P (from the buttom to the top), floor
push button at a
– E.
Wiring example see page 8.
Snap-on the upper cover
Put on the upper cover at both adjustment
increments of the lower cover (
1
).
Snap on the upper cover below with slight
pressure (
2
)
Connect the handset
Plug in the Western connector of the handset
cord into the socket at the underside of the
telephone.
1
2
floor push button
