PI-GB_FVU1200_Art0016493_1v0.doc 4
12/2005
Brief description
Basic functions
Number of inputs
2
Number of outputs
1
Basic mode
The signal from the main front-door station is switched to
the video in-house station (e. g. front-door station at main
entrance).
Switching
The signal from the flat-door video front-door station is
switched to the video in-house station when
•
a front-door call arrives from the flat-door video front-door
station,
•
the image switch button at the video in-house station is
operated.
•
the handset is picked up after the signal has been
switched off following a front-door call from the flat-door
video front-door station (e. g. because of a front-door call
to a different front-door station within the system).
Automatic switch-back to
basic mode
•
the communication is terminated at the video in-house
station (e. g. put down the handset),
•
the image switch button is operated again at the video in-
house station
•
after max. 4 min. (limited by internal timer)
Additional functions
Manual programming
to store the AS address for flat-door video front-door station
and serial number of monitor
Cable connection
Cable cross sections for the connecting cables
Terminals
Cable cross section
Cable diameters
Connection terminals video output *,
Connection terminals TCS:BUS *
0.12 ... 0.5 mm
2
0.4 ... 0.8 mm
Connection terminals video input 1 and 2
0.5 ... 1.5 mm
2
0.8 ... 1.4 mm
*available 2x per wire
To be noted during connection
!
Disconnect the supply voltages before working on the device!
TCS TürControlSysteme AG
•
Geschwister-Scholl-Str. 7
•
39307 Genthin
Subject to change without notice.
Phone: +49 39 33 / 87 99 10
•
Fax: +49 39 33 / 87 99 11
•
www.tcs-germany.com
Art.Nr. 0016493 Version 1.0 mi