PI-GB_FVU1200_Art0016493_1v0.doc 3
12/2005
Device overview
Programming
key
LED
Programming mode
Connection terminals video input of
main front-door station
Connection terminals video output
of video in-house station (monitor)
Connection terminals
TCS:BUS
Connection terminals video input of
flat-door video front-door station
Technical data
Supply voltage:
+24 V ± 8 % (via power supply and control unit)
Case: built-in
case
Dimensions (in mm):
H 52 x W 52 x D 23
Weight 35
g
Admissible ambient temperature:
- 20 °C ... + 50 °C
Input current
3-wire:
I(a) = 0.4 mA, I(P) = 0.4 mA
passive
I(Pmax) = 9 mA active
Application
•
The FVU1200 is designed to switch between two video signals for one video in-house
station (monitor). It was specially designed to switch to a flat-door video front-door sta-
tion. One FVU1200 is required for each flat (with a monitor).
•
In the basic mode the signal from the main front-door station is switched to the video in-
house station (e. g. front-door station at main entrance). The signal from the flat-door
video front-door station is switched to the video in-house station when
–
a front-door call arrives from the flat-door video front-door station,
–
the image switch button at the video in-house station is operated.
•
The device is suitable for installation in a one gang box behind the front-door station or
directly in the flush-mounted installation box of the flush-mounted front-door station.
!
The FVU1200 must always be connected to the video input of the main front-door sta-
tion via a video distributor (e. g. VT02-EB or VT04).
TCS TürControlSysteme AG
•
Geschwister-Scholl-Str. 7
•
39307 Genthin
Subject to change without notice.
Phone: +49 39 33 / 87 99 10
•
Fax: +49 39 33 / 87 99 11
•
www.tcs-germany.com
Art.Nr. 0016493 Version 1.0 mi