TCS FIL1101-0140, Информация о продукте, Страница: 14 / 20

14 05/2013
TCS TürControlSysteme AG, TCS Hotline Germany: Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129

Mail: hotline@tcsag.de FIL1101 UK 1A mi
Set optical call indication
For 8 different incoming calls, (door calls from 2 different front-door stations, floor call, in-
ternal call, sub-door calls 1to 4) different flashing sequences of the blue lighting bar as well
as their respective duration after the incoming call can be set.
Initiate
programming
If not yet done
enter
…
.
.
.
…
* 4x # flashing sequence # duration #
x = 1 floor call
(WE* = 1 # 30)
= 2 internal call (WE* = 1 # 30)
= 3 door call 1 (AS less or equal audio AS-
threshold) (WE* = 2 # 30)
= 4 door call 2 (AS larger than audio AS-
threshold) (WE* = 2 # 30)
= 5 sub-door call 1 (WE* = 2 # 30)
= 6 sub-door call 2 (WE* = 2 # 30)
= 7 sub-door call 3 (WE* = 2 # 30)
= 8 sub-door call 4 (WE* = 2 # 30)
= 9 GFA-call (WE* = 1 # 30)
flashing sequence
= 0 OFF
= 1 blinks fast
= 2 blinks
= 3 flashes 1:7 (0.5 s ON / 3.5 s OFF)
= 4 flashes 7:1 (3.5 s ON / 0.5 s OFF)
duration
= 1 to 120 s
= 0 when door call: =door standby time,
when internal call and floor call: 30 s
correct values has
been entered

A positive acknowledgement tone sounds,
the red LED acknowledges with selected
flashing sequence (e.g.
flashing 1:7), dura-
tion 5 s.
then the red LED is ON for 3 s.

Then the red LED blinks.
The selected optical call indication is stored.
select further optical
call indications Repeat the process.
incorrect value has
been entered A negative acknowledgement tone sounds
when pressing the #-key.
The red LED blinks fast for 3 s,
then blinks again.
* WE = factory setting