TCS AZC41000-0010, Информация о продукте

Страница: 27 / 28

27
Infrared remote control change batteries
For the infrared remote control, 1 button cell CR2025 (DC 3.0 V) is necessary.
► Remove battery cover on the back of the infrared remote control.
► Observe the polarity of the battery and the marking “+/-” in the battery compartment.
► Insert the batteries.
► Replace battery cover.
CAUTION! Danger of explosion.
Do not recharge the used button cells.
Cleaning
CAUTION! Loss of function due to short-circuit and corrosion.
Water and cleaning agents can enter the device. Electronic elements can get damaged due to
short-circuit or corrosion.
Avoid water and detergents from entering the device! Clean the device with a dry or slightly wet
cloth.
CAUTION! Damages on the surface of the device
Abrasive or scratching detergents damage the surface of the device.
Do not use any abrasive detergents! Remove stronger stains with a pH-neutral household
cleaner.
Conformity
Declarations of conformity are available for download under www.tcsag.de.
Information on disposal
Dispose the device separately from domestic waste via a collection point for electronic scrap.
Ask your county administration for the responsible collection point.
Dispose the parts of the packaging in collecting tanks for cardboard and paper resp. plastics.
Disposal instructions for batteries
Used batteries should not be disposed of with household waste!
They must be returned to a collection point for used batteries.