TCS AZC41000-0010, Информация о продукте

Страница: 23 / 28

23
Programming with master transponder
• The transponder (cards or keys) must be positioned max. 30 mm from the nameplate glass in front of
the transponder reader.
• If the instruction sequence is interrupted for 8 seconds, the whole instruction sequence is dismissed
and a negative acknowledgement tone sounds.
Keep the device closed during programming to prevent programming errors due to an open
sabotage contact.
Initiate programming
authorization via
master transponder
present master tran-
sponder
Master transponder
is recognized:
device ready for pro-
gramming
wrong, unknown master
transponder
No input
► Hold the master transponder in front of
the nameplate glass.
a positive acknowledgement tone sounds ,
LED lights green for 3 s,
LED blinks green again.
a negative acknowledgement tone sounds,
LED lights red for 3 s,
LED goes OFF.
The code entry is blocked for 2 min
after the wrong master transponder
has been presented 3 times.
The LED lights red for 2 min.
► Start again.
After 2 min the device automatically terminates
the programming mode, the LED goes out.