TCS 700-30, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 56

TCS900003, Rev.6
04/26/2016
Check us out at www.TCSmeters.com !
Page 2
Table of Contents
Warning Symbols
CAUTION
Follow the warning instructions within the
following information to avoid equipment
failure, personal injury or death.
TURN POWER OFF
Before performing any maintenance, be sure to
turn system power off to avoid any potential
electric spark
FLAMMABLE
Flammable liquids and their vapors may cause a
fire or explosion if ignited. EYE PROTECTION
Pressurized systems may cause hazardous leaks
and spray that may be dangerous for your eyes.
Always wear eye protection around pressurized
systems and its hazardous liquids.
INJURY
Wear gloves for protection from hazardous
liquids that may cause irritation or burns.
READ
Read and understand all related manuals
thoroughly. The Engineering and OIM manuals
will provide the knowledge for all systems,
maintenance and operation procedures. If you
have any questions, please consult the factory.
Safety Warning Symbols 2
Receipt & Inspection 3
Notice 3
Meter Overview 4
Meter Specifications 5
Meter Types 5
Material of Construction 6
System Recommendations 6
System Recommendations (Continued) 7
System Recommendations (Continued) 8
Above Ground Storage System 9
Mobile Fueling System 10
Start Up Recommendations 11
Start Up Recommendations (Continued) 12
Direction of Flow 12
Meter Calibration 13
Meter Calibration (Continued) 14
Meter Calibration (Continued) 15
Calibration Adjustment 15
Split Compartment Testing 16
Split Compartment Testing (Continued) 17
Split Compartment Testing (Continued) 18
Maintenance 19
Maintenance (Continued) 20
Storage Instructions 20
Dimensions 21
Meter Assembly 22
Meter Assembly (Continued) 23
Air Eliminator Assembly 24
Air Eliminator Assembly (Continued) 25
Strainer / High Volume Strainer Assembly 26
Strainer / High Volume Strainer Assembly (Continued) 27
Hydraulic Preset Valve Assembly 28
Hydraulic Preset Valve Assembly (Continued) 29
Air Check Valve Assembly 30
Torque Specifications 31
Drive Components 32
Disassembly of Meter 33
Disassembly of Meter (Continued) 34
Disassembly of Meter (Continued) 35
Inspection of Parts 36
Reassembly of Meter 37
Reassembly of Meter (Continued) 38
Reassembly of Meter (Continued) 39
Reassembly of Meter (Continued) 40
Disassembly of Strainer 41
Reassembly of Strainer 41
Disassembly of Air Eliminator 42
Reassembly of Air Eliminator 42
Disassembly of Hydraulic Preset Valve 43
Disassembly of Hydraulic Preset Valve (Continued) 44
Reassembly of Hydraulic Preset Valve 44
Seal Replacement for Hydraulic Valve 45
Disassembly of Air Check Valve 46
Reassembly of Air Check Valve 46
Meter Trouble Shooting 47
Air Eliminator Trouble Shooting 48
Hydraulic Preset Valve Trouble Shooting 49
Air Check Valve Trouble Shooting 49
Material Safety Data Sheet 50
MSDS (Continued) 51
MSDS (Continued) 52
MSDS (Continued) 53
Notes 54
Warranty 55