TCS Basys Controls QWL 3.1 2 Series Скачать руководство пользователя страница 1

Страница: 1 / 11

2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com

Product Manual

Description

The QWL 3.1 Rev 2 Series Integrated Building Manager

Panel contains a Ubiquity

Site Gateway with integrat-

ed lighting and energy management controls.

Features

Ubiquity Site Gateway

• Site gateway to Ubiquity: enables controller interoper-

ability with Ubiquity

• Enables Ubiquity to maintain controller programming

and scheduling

• Compatible with all TCS Basys supported controllers

• Controller protocols supported: TCSbus, Modbus

• Supervisory control routines

• Supervisory override strategy

• Auto discovery of networked controllers

• Three integrated RS-485 serial ports

• Additional serial ports can be added via USB ports

• Integrated Ethernet controller with firewall capabilities

• Integrated configuration web page

• User adjustable controller monitoring rate

• Remotely upgradable gateway software

Lighting Controller (SLQ218)

• 365-day programming for each circuit

• Analog input for photo sensor with the ability to

remotely adjust sensitivity level

• Selectable power failure state

• Eight channel lighting schedules for interior and exte-

rior applications

• Digital photocell inputs

• Astronomical clock

• External time clock or occupancy sensor input for

each channel

• Channel status LEDs

• Selectable normally open or normally closed relays

• Built-in 2 Amp relays with hand/off/auto switches

Contents

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Factory IP Network Address Configuration

. . . . . . . . .

Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

RS-485 Controller Network Wiring & Setup

. . . . . . . . . . 3

Gateway Configuration Page

. . . . . . . . . . . . . . . . . . . . .

Commissioning Tools

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Programming - Lighting Module . . . . . . . . . . . . . . . . . . . 6

Programming - Pulse Meter . . . . . . . . . . . . . . . . . . . . . . 9

TCS ZigBee Wireless Network. . . . . . . . . . . . . . . . . . . 10

LED Display and Push Buttons . . . . . . . . . . . . . . . . . . 10

Checkout & Troubleshooting . . . . . . . . . . . . . . . . . . . . 10

Energy Meter (SEQ100)

Utility Pulse Counting Meter for Monitoring of:

• Electric single and 3 phase kW and kWh

• Gas

• Water

• BTU

QWL 3.1 Rev 2 Series

Integrated Building Manager Panel
Models to Support Wired and
Wireless Networks

Factory IP Network Address

Configuration

The QWL 3.1 Rev 2 Series Panels are typically ordered

pre-programmed to customer specific networks and no

additional software configuration is required. This is the

preferred purchasing method.
If a QWL 3.1 Rev 2 Series Panel is purchased without

pre-programming it will be shipped with DHCP client

enabled. The configuration page is available through a

browser for additional configuration of the QWL 3.1 Rev

2 Series Panel local IP address. Contact your network

administrator to determine the local IP address (refer to

the MAC address available on the product label).

v1216.1

Содержание QWL 3.1 2 Series












Результаты поиска

Содержание QWL 3.1 2 Series

Отзывы:

Похожие инструкции для QWL 3.1 2 Series

Бренды по названию

Популярные бренды

TCS Basys Controls QWL 3.1 2 Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание QWL 3.1 2 Series

Отзывы:

Похожие инструкции для QWL 3.1 2 Series

Бренды по названию

Популярные бренды