TCP Smart SMAWDEHUM20LBD068CF, Инструкция по эксплуатации

Страница: 19 / 27

19
Power button
In the standby state, touch this button to turn on, the operation indicator lights up
and the default fan speed is high, and the default humidity is 50%. In the power-on
state, touch this button to turn off, the running indicator light goes off and the
compressor stops immediately, and then the fan shuts down after 30 seconds delay.
Dehumidify Mode
Touch the mode key to switch between automatic, sleep and dry mode. Press once
to switch the mode from one to another, the corresponding indicator lights up.
Auto Mode:
when environmental humidity is +3° higher than the set humidity, the fan starts
working; the compressor starts working after 3 seconds.
When environmental humidity is -3° lower than the set humidity, the compressor
stops working and fan stops working after 30 seconds’ delay.
Both fan speed and humidity can be adjusted under auto mode.
Continuously Drying Mode:
In this mode, the machine will continue to run in high
fan speed;
the compressor keeps working without control due to the humidity.
Fan speed is adjustable but humidity is not adjustable
Sleep Mode:
Touch the sleep button, the button lights up and start the sleep
function; the default humidity is 50%. After no operation for 10 seconds, all
indicators turn dark gradually and the fan speed is automatically switched from high
to low. Press any button to wake up the indicator. Touch sleep button again to exit
the sleep mode.
When environmental humidity is equal to or greater than 57%
，
the compressor
stops working and the fan shut down after 30 seconds’ delay.
When environmental humidity is equal to or less than 63%
，
the fan starts working and
compressor starts working after 3 seconds.
Fan speed and humidity cannot be adjusted under sleeping mode.
In sleeping mode, when the water tank is full, the machine will not alarm but the
trouble code will display darkly as a reminder to empty water tank.