TCP Smart SMAWDEHUM20LBD068CF, Инструкция по эксплуатации

Страница: 13 / 27

13
5.2 EMPTYING THE WATER TANK
There are two ways of removing collected water produced by the unit.
A. Manual draining: Empty water tank by manual.
B. Continuous draining: Use gravity to drain condensated water by attaching a drain
hose.
When the water tank is full the unit will automatically shut down. It will start again once the
water tank has been emptied and re-installed properly.
When the tank is full, the unit will make a buzzing sound, and the “Water Full” light will turn on

Press the POWER button to turn off the unit.

Pull the water tank and simply slide out of the body of the dehumidifier.

Empty the water into an area with a drain or outside.

Clean the inside of the tank as well as the outside.

Replace the empty tank back into the unit.

Press the POWER button to resume operating.
If the Water Full light does not extinguish, check that the float is correctly in place.