48
Foot:
Zip foot
Stitch setting:
A (B, for sewing
very close to the
edge of the fabric)
Stitch length:
1 - 4
9. Sew the button in place.
10. Set the stitch selector dial to "B" and
sew a few stitches.
11. Remove the fabric and cut off the
thread.
12. Pull the threads to the lower side
and tie them off by hand.
Tips:
•
If you want the button to be sewn on
loosely (on a "stalk") place a darning
needle on top of the button and sew
over that.
•
When the button has four holes, sew
the back pair first and then the front.
Inserting a zip
By using the zip foot you can sew right
up to the edge of the zip without the
needle hitting it.
1. Mount the zip foot on the left or the
right side of the needle, according to
the side on which you wish to sew
(see the section "Changing the
foot").
2. Insert the fabric about 2 cm under
the zip.
3. Sew the zip in place.
4. To avoid the zip tab:
a) Leave the needle sticking in the
fabric
b) Raise the foot and
c) Move the zip tab behind the foot
