Air Conditioner Service Manual
21
10.2
Installation for the first time
Indoor unit
Install the indoor unit on a strong wall that is
not subject to vibrations.
The in let and outlet ports should not be
obstructed: the air should be able to blow all
over the room.
Do not install the unit near a source of heat,
steam, or flammable gas.
Install the unit near an electric socket or private
circuit.
Do not install the unit where it will be exposed
to direct sunlight.
Install the unit where connection between indoor
and outdoor unit is as easy as possible.
Install the unit where it is easy to drain the
condensed water.
Check the machine operation regularly and
reserve the necessary spaces as shown in the
picture.
Select a place where the filter can be easily
taken out.
OUTDOOR UNIT
Do not install the outdoor unit near sources of
heat, steam or flammable gas.
Do not install the unit in too windy or dusty places.
Do not install the unit where people often
pass. Select a place where the air discharge
and operating sound level will not disturb the
neighbours.
Avoid installing the unit where it will be exposed
to direct sunlight (other wise use a protection, if
necessary, that should not interfere with the air
flow).
Reserve the spaces as shown in the picture
for The air to circulate freely.
Install the outdoor unit in a safe and solid place.
If the outdoor unit is subject to vibration, place
rubber gaskets onto the feet of the unit.
Over 50mm
O
Over 300mm
Over 100mm
Minimum space to be left (mm) showing in the
picture.
300mm
500m
m
2000mm
300mm
50
0mm
