TCL TCLSS09 Скачать руководство пользователя страница 28

25

MAINTENANCE

Periodic  maintenance  is  essential  for  keeping your air 
conditioner efficient.
Before  carrying  out  any  maintenance ,  disconnect the 
power supply by taking the plug out from the socket.

INDOOR UNIT

ANTIDUST FILTERS

1. Open  the  front panel following  the direction  of  the 
    arrow
2. Keeping the front panel raised with one hand, take out 
    the air filter with the other hand
3. Clean the filter with water ;  if the filter is soiled with 
    oil,it can be washed with warm water  (not exceeding 
    45

).

    Leave to dry in a cool and dry place. 
4. Keeping the front panel raised with one hand ,  insert 
    the air filter with the other hand
5. Close   

The  electrostatic  and  the  deodorant filter (if installed)
cannot  be  washed  or regenerated and must be replaced 
with new filters after every 6 months.

CLEANING THE HEAT EXCHANGER

1. Open  the  front  panel  of  the  unit  and  lift  it till its 
    greatest stroke and then unhooking it from the hinges 
    to make the cleaning easier.
2. Clean  the  indoor  unit  using  a  cloth  with the water 
    ( not higher than  40

)  and  neutral soap . Never use 

    aggressive solvents or detergents. 
3. If  the outdoor unit  is clogged ,  remove the leaves and 
    the waste and remove the dust with air jet or a bit of water.

END OF SEASON MAINTENANCE

1. Disconnect the automatic switch or the plug.
2. Clean and replace the filters
3. On a sunny day let the conditioner work in ventilation for some hours , so that the inside of the unit can 
    dry completely..

 REPLACING THE BATTERIES

When:  
             
How:    
             

N.B:  Use only new batteries. Remove the batteries from the remote controller when the conditioner is not in 
          operation

WARNING ! Do  not  throw  batteries  into  common  rubbish ,  they  should  be disposed of  in the special 
                      containers situated in the collection points.

antidust filter

 There is no confirmation beep heard from the indoor unit. 
 The LCD doesn

 act.

 Take off  the cover at back. 
 Place the new batteries respecting the s and - .

Содержание TCLSS09

































Отзывы: